|
|
|
|
|
|
M350 DIN Rail Mounting Kit
|
|
Our Price: $2.75
|
|
|
These sturdy DIN rail mounting brackets come in handy for a wide variety of projects where DIN rail is used for mounting the M350 on a DIN Rail. Comes in set of two pieces with mounting screws included.
|
|
|
|
|
|
|
|
|
|
Mini PCIe Adapter Board
|
|
Our Price: $2.95
|
|
|
If you want to use a 1/2 height Mini PCIe card, but only have a full height card slot this adapter board is all you need to solve your problem.
|
|
|
|
|
|
|
|
|
|
Replacement 6'/1.8m USB Cable for OBDLink Scan Tools
|
|
Our Price: $2.95
|
|
|
This USB cable will work with the standard, Bluetooth, and Wifi OBDlink Scan Tools.
|
|
|
|
|
|
|
|
|
|
Vesa Mounting Screws
|
|
Our Price: $2.99
|
|
|
These VESA screws are compatible with the M350 chassis and are an ideal way to mount your PC on the back of your monitor
|
|
|
|
|
|
|
|
|
|
10" Double Locking SATA Cable
|
|
Our Price: $2.99
|
|
|
Our 10"/25cm Double Locking SATA Cable is ideal for Mini ITX systems. It is just long enough to span the distance between the hard drive and motherboard SATA connectors. The shorter cable allows for better air flow within the case which will result in lower operating temperatures. The locking connectors insure that the cable will not slip off over time the way traditional SATA connectors do.
|
|
|
|
|
|
|
|
|
|
JAE to IDE/Notebook ROM Drive Adapter
|
|
Our Price: $2.99
|
|
|
The JAE to IDE adapter will you to connect any 50 pin IDE based Notebook DVD drive to any standard 40 pin IDE bus on a motherboard.
|
|
|
|
|
|
|
|
|
|
SATA Drive Power Cable
|
|
Our Price: $2.99
|
|
|
This 15cm/6" adapter allows you to power a SATA hard drive with a standard four pin Molex power connector. The locking connector insures that the cable will stay in place even on demanding applications.
|
|
|
|
|
|
|
|
|
|
6'/2m USB A to Mini B cable
|
|
Our Price: $2.99
|
|
|
Our 6'/2m USB A to Mini B cables are ideal for connecting devices to your computer like the Joycon, Joycon EX/EXR, camera, or Blackberry.
|
|
|
|
|
|
|
|
|
|
8"/21cm RPSMA Female to RPSMA Male Bulkhead Cable
|
|
Our Price: $2.99
|
|
|
These cables are ideal if you need to extend an Ipex to RPSMA cable inside a chassis or if you need to extend your wifi antenna just a few inches/cm.
|
|
|
|
|
|
|
|
|
|
P4 to P4 12V CPU Power Wire
|
|
Our Price: $3.49
|
|
|
Our 9" P4 to P4 cable will connect directly to the M2-ATX/M2-ATX-HV and your motherboard to provide power to the CPU. This cable is required for specific mini itx boards like the D425KT and D525MW.
|
|
|
|
|
|
|
|
|
|
Replacement Pre Wired IR Receiver for Lilliput and Mini Touch Monitors
|
|
Our Price: $3.99
|
|
|
This pre-wired IR receiver will work with Lilliput and Mini Touch monitors. The attached wire measures 5"/12.7cm
|
|
|
|
|
|
|
|
|
|
3 for 1 Molex Splitter
|
|
Our Price: $3.99
|
|
|
Our Molex splitter allows you to turn a single female Molex plug into three.
|
|
|
|
|
|
|
|
|
|
12"/30cm Slimline SATA Cable for SATA Notebook DVD Drives
|
|
Our Price: $4.95
|
|
|
Our 12"/30cm DVD SATA and Power cable works on all Notebook/SLimline DVD drives. They provide both power and data connections.
|
|
|
|
|
|
|
|
|
|
M1/2/3-ATX Power Supply Adapter
|
|
Our Price: $4.99
|
|
|
The m1/2/3-ATX adapter offers an easy way to test or power your automotive grade PSU on the bench or in the house with a switching AC to DC PSU.
|
|
|
|
|
|
|
|
|
|
Molex to P4 CPU Power Adapter
|
|
Our Price: $4.99
|
|
|
These CPU power adapters are an easy way to add a P4 power connector to AMD and Intel boards like the D525MW. It is 6"/15cm long and plugs directly into the motherboard and any female Molex connector.
|
|
|
|
|
|
|
|
|
|
Mini Jack to RCA Adapter
|
|
Our Price: $4.99
|
|
|
This adapter turns a standard PC mini jack audio plug into a stereo RCA connection.
|
|
|
|
|
|
|
|
|
|
USB Pin Header Adapter Right Facing
|
|
Our Price: $4.99
|
|
|
The Right facing USB pin header adapter is the easy way to turn a 9 pin USB header into a dual USB panel. This adapter will put the USB ports to the right of the header, normally over the PCI slot. If you need the USB ports to be over the center of the board you need the left version.
|
|
|
|
|
|
|
|
|
|
USB Pin Header Adapter Left
|
|
Our Price: $4.99
|
|
|
The left facing USB pin header adapter is the easy way to turn a 9 pin USB header into a dual USB panel. This adapter will put the USB ports to the right of the header, normally over the center of the board. If you need the USB ports to be over the PCI slot you need the right version.
|
|
|
|
|
|
|
|
|
|
8mm Bulkhead Mount Power/Reset Button
|
|
Our Price: $4.99
|
|
|
Our 8mm Bulkhead mount Power/Reset Button is a direct fit for our Black Box series cases. They are also ideal for other mini itx based carputer, car pc, and industrial based computers.
|
|
|
|
|
|
|
|
|
|
Joycon EX/EXR Test Buttons
|
|
Our Price: $4.99
|
|
|
These test buttons allow you to test your Joycon EX or EXR before installing it in the car.
|
|
|
|
|
|
|
|
|
|
COM Port Header Cable for Intel D510M0, D525MW, D2500CC, D2700MUD Motherboards
|
|
Our Price: $4.99
|
|
|
These COM Port Header Cables are designed to work with the Intel D510M0, D525MW, D2500CC, D2700MUD Motherboards
|
|
|
|
|
|
|
|
|
|
10 Pin Nano ATX to Standard 20 Pin ATX Adapter
|
|
Our Price: $5.99
|
|
|
The Nano ITX to 20 pin ATX adapter is an easy way to connect any PICO style PSU (PICO PSU 90 or 120,M3-ATX, or equivalent) directly to NANO ITX boards eliminating adapter cables.
The adapter is recommended when building a system using the Black Box N.
|
|
|
|
|
|
|
|
|
|
20 Pin to 20 Pin ATX Power Supply Harness
|
|
Our Price: $5.99
|
|
|
Our 20 pin to 20 pin ATX harness works with all open frame power supplies like M1-ATX, M2-ATX, Morex, and more. It measures 9" and has 1x 4 pin Molex power connector, 1x SATA, and 1x 4 pin floppy power connector.
|
|
|
|
|
|
|
|
|
|
Right Angle Gold Plated HDMI to HDMI Connector
|
|
Our Price: $5.99
|
|
|
Our Right Angle Gold Plated HDMI to HDMI Connector can be used with the HDMI Lilliput 669GL and 869GL to make the HDMI connection come from the rear. You need one of these adapters if you are going to convert a 669GL into a double DIN monitor from the stock stand alone unit. They will pass both the touch and video signals.
|
|
|
|
|
|
|
|
|
|
12v Molex to 8mm Bulkhead Cable
|
|
Our Price: $6.99
|
|
|
Our 12v bulkhead power cable is an ideal way to supply regulated power from your smart PSU directly to your touch screen
|
|
|
|
|
|
|
|
|
|
50cm/20" USB Cable for Bybyte Frames
|
|
Our Price: $6.99
|
|
|
This USB cable is specifically designed to work with 2nd generation Bybyte Double DIN and Black Box Nano products with the mini USB connector.
|
|
|
|
|
|
|
|
|
|
2M/6' RPSMA Male to RPSMA Female WiFi Antenna Extension Cable
|
|
Our Price: $7.99
|
|
|
Our 2M/6' RPSMA Male to RPSMA Female WiFi Antenna Extension Cables allow you to extend your 802.11 antenna to an ideal location for maximum signal reception.
|
|
|
|
|
|
|
|
|
|
100M/330' USB Bluetooth Dongle Vista Compliant
|
|
Our Price: $7.99
|
|
|
A USB Bluetooth transmitter is a beautiful thing to have when you need a simple, quick, and affordable way to transmit data and sound at distances of 100m/300'. Simply put, Bluetooth is a Radio Frequency, or RF, transmitter. RF has the distinct advantage of being able to pass through walls and objects, unlike IR or infrared signals (what wireless remotes use). We use them in our line of car PC's for things like listening to DVD's with wireless headphones, answering cell phone calls, wireless OBDII transmitters, and more. Use them anywhere you need wireless transmission that is limited to 100m/300'. Our Bluetooth transmitters are both V1.1 and V1.2 compliant. They are also Vista compliant.
We have validated the module to work with both Centrafuse 2.0 and Centrafuse Auto (3.0)
|
|
|
|
|
|
|
|
|
|
Replacement VGA/USB Patch Cable for Lilliput Monitors
|
|
Our Price: $8.99
|
|
|
Our replacement Lilliput cables have a standard 15 pin male VGA/male USB A connectors on the PC side and a 9 pin Mini DIN connector on the monitor side. They work with most Lilliput monitors including the EBY701, 629GL, 669GL, GL701, 869GL, and 889GL.
|
|
|
|
|
|
|
|
|
|
Replacement Lilliput SKS Monitor Cable
|
|
Our Price: $8.99
|
|
|
The SKS cable connects to most Lilliput monitors including the EBY701, 629GL, 669GL, 629GL-DVI, 869GL, and 889GL. They connect directly to the monitor on one side and provide a male 9 pin Mini DIN connector (for VGA video and Touch functions), female power input, 1x RCA audio, and 2x RCA video inputs.
|
|
|
|
|
|
|
|
|
|
3dBi Wifi Antenna Kit
|
|
Our Price: $8.99
|
|
|
This kit combines our standard 3 dBi RP SMA Wifi antenna along with our 8"/20cm Hirose U.fl/IPEX to bulkhead RP SMA cable at a discounted price.
|
|
|
|
|
|
|
|
|
|
5m/16' 5v Black Box Line Set
|
|
Our Price: $8.99
|
|
|
Our 5m/16' 5v Line Set for Black Box Mobile and Black Box PCI is the easy way to add power for 5v devices like USB hubs or external storage or DVD drives.
|
|
|
|
|
|
|
|
|
|
Replacement Car Power Adapter for Lilliput Monitors
|
|
Our Price: $8.99
|
|
|
Our replacement Lilliput car power adapter works with all Lilliput 7 and 8" monitors and includes the inline power filter.
|
|
|
|
|
|
|
|
|
|
Monitor Power Cable
|
|
Our Price: $8.99
|
|
|
Our monitor power cables can be an ideal way to power your Lilliput or Xenarc monitor from your PC.
|
|
|
|
|
|
|
|
|
|
Right Angle OBD II Extension Cable 60cm/2'
|
|
Our Price: $9.95
|
|
|
Our right angle OBD 2 extension cable is ideal for use with the OBDLink SX. It keeps the interface out of your way while driving allowing you to keep it connected all of the time.
|
|
|
|
|
|
|
|
|
|
Replacement 6'/1.8m J1962M to DB9F Cable for OBDLink Scan Tools
|
|
Our Price: $9.95
|
|
|
This J1962 male to DB9 female cable will work with the standard, Bluetooth, and Wifi OBDlink Scan Tools.
|
|
|
|
|
|
|
|
|
|
5M/17' Active USB 2.0 Cable
|
|
Our Price: $9.99
|
|
|
These 5M/17' Active USB 1.1/2.0 cables allow you to run external USB based devices without the need for extra power adapters. The end of the cable has a signal repeater/booster that strengthens the signal at its weakest point, allowing an consistent signal over longer distances.
|
|
|
|
|
|
|
|
|
|
3M/10' Shielded VGA Extension Cable
|
|
Our Price: $9.99
|
|
|
Most touch screen monitors come with a 2M/6' VGA cable that just doesn't cut it if your PC is mounted in the trunk or under the rear seat. Our 3m/10' extension cables are the ideal length to use with your stock VGA cable when you need to run your VGA cable to the back to the car. The have ferrite cores and foil shielding to prevent electrical interference and maintain the crisp picture quality over the added distance.
|
|
|
|
|
|
|
|
|
|
S-Video to RCA + Power Camera adapter
|
|
Our Price: $9.99
|
|
|
The S-video to RCA adapter allows you to connect a S-video camera to a screen with only RCA inputs. The cable is 7" long.
|
|
|
|
|
|
|
|
|
|
6 Pin 16AWG Wiring Harness
|
|
Our Price: $9.99
|
|
|
This six pin harness plugs directly into our Mini ITX case. An extra harness is useful if you want to power the PC in your car as well as at home and allows you to load software and troubleshoot at a desk, instead of in the car.
|
|
|
|
|
|
|
|
|
|
15mm Female Metal Locking Power Harness for Black Box Mobile Chassis
|
|
Our Price: $9.99
|
|
|
Having a second power harness for our Black Box series cases allows you to bring the PC in the house for updating software or adding content in the house while leaving the original harness wired in the car.
|
|
|
|
|
|
|
|
|
|
5dBi Wifi Antenna Kit
|
|
Our Price: $9.99
|
|
|
This kit combines our standard 5 dBi RP SMA Wifi antenna along with our 8"/20cm Hirose U.fl/IPEX to bulkhead RP SMA cable at a discounted price.
|
|
|
|
|
|
|
|
|
|
15mm Male 6 Pin Power Harness
|
|
Our Price: $9.99
|
|
|
Our 15mm Bulkhead male or case side power connector is a direct replacement for the one that is included with the Black Box Mobile and Black Box PCI cases.
|
|
|
|
|
|
|
|
|
|
1.5m/4.9' DVI Cable for Lilliput 669GL and 869GL Monitors
|
|
Our Price: $9.99
|
|
|
Our replacement DVI cable works with the Lilliput 669GL, 869GL, as well as the 7" HDMI SKD kit.
|
|
|
|
|
|
|
|
|
|
1.5m/4.9' HDMI Cable for Lilliput 669GL and 869GL Monitors
|
|
Our Price: $9.99
|
|
|
Our replacement HDMI cable works with the Lilliput 669GL, 869GL, as well as the 7" HDMI SKD kit.
|
|
|
|
|
|
|
|
|
|
12mm 3 Pin Locking Power Harness
|
|
Our Price: $12.99
|
|
|
Our 12mm 3 Pin Locking Power Harness is ideal for use as a primary power harness with the M350 case or other custom computer designs.
|
|
|
|
|
|
|
|
|
|
8mm 3 Pin Locking Power Harness
|
|
Our Price: $12.99
|
|
|
Our 8mm 3 Pin Locking Power Harness is ideal for use with the M350 case or other custom computer designs.
|
|
|
|
|
|
|
|
|
|
6'/2m Right Angle OBD II to DB9 Cable for OBDLink Tools
|
|
Our Price: $13.49
|
|
|
Our 2m/6' right angle OBD II (J1962) to DB9 (COM Port) cable is designed to work with the OBDLink, OBDLink Wifi, and OBDLink Bluetooth diagnostic tools from Scan Tool. The low profile right angle design is ideal if you plan to keep your OBDLink tool connected all of the time or for hard to reach connectors.
|
|
|
|
|
|
|
|
|
|
Right Angle OBD II Extension Cable 1.8m/6'
|
|
Our Price: $13.95
|
|
|
Our right angle OBD 2 extension cable is ideal for use with the OBDLink SX. It keeps the interface out of your way while driving allowing you to keep it connected all of the time.
|
|
|
|
|
|
|
|
|
|
12v Monitor Power Kit for Lilliput, Xenarc, and Mini Touch Monitors
|
|
Our Price: $13.99
|
|
|
Our monitor power kit is the easy way to add a regulated power source to your computer for your monitor. Now you can finally get rid of that ugly cigarette lighter power plug.
|
|
|
|
