Downloads & Drivers
Browse by Category
Cables and Adapters
Car PC Peripherals
CD and DVD Drives
Flexible PCI/PCIe Risers
Intel AIO Panel PC's
Mini ITX Case Acc
Mini ITX Cases
Mini ITX Motherboards
Monitor Parts and Accessories
OBD II Cables
OBD II Interfaces
OBD II Software
Power Supplies/ Controllers
RAM Mount Products
Enter Your Email To Sign Up
For Our E-Newsletter:
You are here:
Mini ITX Case Acc
Price: Low to High
Price: High to Low
50 per page
100 per page
200 per page
300 per page
500 per page
M350 DIN Rail Mounting Kit
These sturdy DIN rail mounting brackets come in handy for a wide variety of projects where DIN rail is used for mounting the M350 on a DIN Rail. Comes in set of two pieces with mounting screws included.
M350 Hard Drive or Fan Mounting Bracket
The hard drive mount is an easy way to add a second hard drive or up to 2x 40mm fans to a M350 case.
Vesa Mounting Screws
These VESA screws are compatible with the M350 chassis and are an ideal way to mount your PC on the back of your monitor
M350 Wall Mounting Bracket
The wall mounting brackets allow you to mount the M350 case to any flat surface.
40 x 40 x 10mm 12vDC Fan
Our 40 x 40 x 10mm fan fits the M350 case and is also a replacement for most CPU cooling fans on Mini ITX boards. The 3 wire design allows for speed monitoring. They consume just 0.08A at full speed.
8mm Bulkhead Mount Power/Reset Button
Our 8mm Bulkhead mount Power/Reset Button is a direct fit for our Black Box series cases. They are also ideal for other mini itx based carputer, car pc, and industrial based computers.
High Speed 50x50x10mm 12vDC Exhaust Fan
These high speed 50mm cooling fans move over six CFM (cubic feet per minute) helping to keep your system cool. They use a quiet, ball bearing design for longer life. The three wire design allows for speed monitoring. They are a direct replacement for the fan in our Black Box cases.
2 Port Flush Mount USB Panel
Our two port USB panel is a direct replacement for our Black Box Series cases
Blank End Panel for Black Box Mobile and Black Box PCI
Our blank end panel is a direct replacement for the Black Box Mobile and Black Box PCI cases.
Replacement End Panel for Black Box Mobile Chassis
Our replacement End Panel for Black Box Mobile Mini ITX Chassis is a OEM part and features a 15mm hole for our new metal locking power harness.
5m/16' 5v Black Box Line Set
Our 5m/16' 5v Line Set for Black Box Mobile and Black Box PCI is the easy way to add power for 5v devices like USB hubs or external storage or DVD drives.
Monitor Power Cable
Our monitor power cables can be an ideal way to power your Lilliput or Xenarc monitor from your PC.
6 Pin 16AWG Wiring Harness
This six pin harness plugs directly into our Mini ITX case. An extra harness is useful if you want to power the PC in your car as well as at home and allows you to load software and troubleshoot at a desk, instead of in the car.
15mm Female Metal Locking Power Harness for Black Box Mobile Chassis
Having a second power harness for our Black Box series cases allows you to bring the PC in the house for updating software or adding content in the house while leaving the original harness wired in the car.
15mm Male 6 Pin Power Harness
Our 15mm Bulkhead male or case side power connector is a direct replacement for the one that is included with the Black Box Mobile and Black Box PCI cases.
12mm 3 Pin Locking Power Harness
Our 12mm 3 Pin Locking Power Harness is ideal for use as a primary power harness with the M350 case or other custom computer designs.
8mm 3 Pin Locking Power Harness
Our 8mm 3 Pin Locking Power Harness is ideal for use with the M350 case or other custom computer designs.
4 Port USB Expansion Panel for Black Box Series Chassis
The 4 port USB expansion panel is the easiest way to add 4 additional hard wired USB ports to any of our Black Box Chassis. It is a direct replacement for the blank panel that comes with the Black Box Mobile Cases.
Extended 5m Reset Button and Power LED Harness
Finally there is an easy solution for running an extended reset button and LED power light. No more pulling over to go to the trunk or having to reach under the seat to reset your PC.
Expansion Fan Panel for Black Box Mobile and Black Box PCI Cases
The easy way to almost double the ventilation of your Black Box Mobile or Black Box PCI case in less then five minutes.
15mm 6 Pin Locking Metal Power Harness Kit
If you are building your own carputer and need a main power harness our locking harness kit is perfect.
Black Box Mobile End Panel with Dual USB and 40mm Fan
Our latest end panel for the Black Box Mobile Chassis allows you to add 2x USB 2.0 ports and 1x 40mm high speed cooling fan to our standard Black Box Mobile or Mobile PCI case.
5m/16' Fused Female 6 Pin Power Harness
Our 5m/16' power harness is the easy way to power your PC. It fits both the standard Black Box Mobile and Black Box PCI cases.
Thermaltake Slim X3 Low Profile Socket 775 1156 1155 CPU Fan
The Thermaltake X3 Ultra Low Profile fan measures just 36mm high. The dual heat pipe technology and 80 x 15mm fan ensure your system will remain cool and operating efficiently.
VESA and Wall Mount for M350 Case
Shipping and Returns
Terms and Conditions
Mon-Fri 9am-5pm EST
Ecommerce Site Design by