The new 2009 version of Lilliput's 629GL-70NP/C/T monitor is 50% brighter then the the 2008 model. The LED backlight design offers a brighter crisper picture with no warm up time, better performance in cold weather with a longer life and lower power consumption then the older CCFL backlight model. The upgraded 4 wire restive touch screen now has an improved anti glare coating applied to it and works with the included stylus or your fingers. Our exclusive custom cut screen protector will keep the surface of your screen protected while further reducing sun glare at the same time. The updated firmware now allows the 629GL to be set for automatically turn on when power is applied to the monitor. Our simple 5 step instructions to do that can be found here.

• As an additional service every monitor we sell is pre tested to make sure it is from manufacturers defects and dead pixels.

ADDED BONUS: Every monitor now comes with a custom cut touch screen protector a $10 value

Our exclusive custom cut screen protector will keep the surface of your screen protected while further reducing sun glare at the same time

• Screen Size: Diagonal 7” / 178mm 1152000 pixels
• Supported Resolution: 800 x 480 up to 1024 x 768
• Screen Ratio: 15:9
• Contrast Ratio: 500:1
• Brightness: 450 cd/m2 (Nits)
• Viewing Angle: 45°/60°(Up/Down), 65°/65°(Left/Right)
• Input Voltage: 11-13vDC
• Power Consumption: <9W
• Outer Dimensions: 177 × 107 × 77mm W x H x D
• Color System: PAL-4.43 / NTSC-3.58
• Audio Output: >100mA
• Weight: 474g / 1lb 1oz

• Our monitors feature the NEW Locking Connector Patch Cables
  
• Included Stylus for easy use of the touch screen
  
• The monitor harness connects the monitor to the auxiliary A/V Inputs
  
• The 12vDC Automotive Power Supply allows for easy use in the car
  
• The Touch Screen Drivers work with Windows, Linux, and Mac
  
• Full Function Wireless Remote Control
  
• The 120vAC adapter allows for home use and bench testing