The Black Box N is the first and only Double DIN Carputer enclosure for the DIY market. The case has been designed to work with all Nano and Pico ITX motherboards* as well as LED backlight EBY701-NP/C/T and GL629-70NP/C/T touch screen monitors. The double DIN form factor makes for easy installation** and the ability to mount 2 hard drives allows you to keep your OS on a small Solid State hard drive and content of a larger cheaper traditional notebook drive.

* Although the case will support all Nano and Pico ITX boards the recommended board is the VIA NX15000G.
** Even though the case has a Double DIN form factor a trim ring may be required. This will vary from vehicle to vehicle. Metra and Scoshe are the leading manufacturers of these kits. Normally they can be purchased, if required, for under $20.

• Dimensions: 177 x 107 x 177mm W x H x D
• Material: ABS Plastic
• Weight: 1.25lb./0.57kg
• Storage Temperature: -40°C to +80°C
• Power Supply: M3-ATX Recommended (not included)
• Supported Motherboards: Nano ITX (120 x 120mm) or smaller
• Wiring Harness: 6 pin 20AWG color coded
• Audio: 2x 3.5mm (line input/output) 1x Optical
• Audio Wiring: 8 wire 20AWG color coded harness (optional not included)
  
• Cooling Fan: 1x 40mm/5,000RPM/12vDC Fan
• Noise Level: <21dBA
  Other: 5vDC to Molex adapter

The complete case includes:

• 1x Black Box N main housing with LCD frame
• 1x 40mm High Speed Cooling Fan with 3 pin Header
• 1x "H" Bracket to support LCD Control Board
• 1x Molex to 5v Power Jack Adapter
• 1x 6 pin Wiring Harness with 2.5mm LCD power Plug
• 2x 3.5mm Audio Jack with Wire and Crimp Connectors (Assembled)
• 1x 3.5mm Audio Jack with Wire and Crimp Connectors (Unassembled)
• 1x 14 pin/2.0mm Pitch Header Socket for Audio Ports
• 16x 1/4" Pan Head Screws
• 4x 1/4" Pan Head Screws to Support LCD Control Board
• 6x 1/4" Truss Head Screws
• 4x 4-40 X 3/16" Machine Screws for Hard Drive