The new Lilliput 889GL-80NP/C/T monitor is LED backlight, and has the auto switching feature for use with rear view cameras. Just connect the green wire on the monitor to the + line of your reverse brake light bulb. When the car is put in reverse the monitor will automatically switch to the aux input to show you an image from the camera. When you go in to drive it will automatically switch back.

• Screen Size: Diagonal 8” 1152000 pixels
• Supported Resolution: 800 x 480 up to 1024 x 768
• Screen Ratio: 16:9
• Contrast Ratio: 300:1
• Brightness: 250 cd/m2 (Nits)
• Viewing Angle: 45°/60°(Up/Down), 65°/65°(Left/Right)
• Input Voltage: 11-13vDC
• Power Consumption: <9W
• Color System: PAL-4.43 / NTSC-3.58
• Audio Output: >100mA
• Inner Dimensions: 176 x 99mm W x D
• Outer Dimensions: 207 x 145 x 32mm W x H x D